Sign pricing calculator
Build a sign quote line by line: the size, the sign type, illumination, install, and design. Every price is your own, so the total matches the way your shop works.
- Four sign types
- Illumination option
- Install and design included
Before you run the numbers
One total, every line visible
A sign quote is not one price. It is a short list of separate charges: the face of the sign, any lighting inside it, the work to put it up, and the design work before it is made. When those lines are bundled into a single figure, it is hard to tell what you are paying for.
This calculator keeps the lines separate. Enter the rates and fees your shop uses, measure the sign, and see the total build up line by line, with a price per square foot at the end.
Your numbers
1. Sign size
Area is width times height: 0 sq ft.
2. Choose a sign type and enter your price for it
3. Illumination
4. Install fee
Percent mode works the share out from the face cost including illumination, when illumination is on.
5. Design fee
Result
Estimated total
Enter your own prices on the left to see the total.
Short answer
A sign pricing calculator works out a sign quote from the sign area, the price per square foot for the sign type you choose, an illumination adder if the sign is lit, an installation fee, and a design fee. Every rate and fee is one you enter, so the total reflects your own prices.
What the price covers
What goes into the price of a sign?
The price of a sign covers four kinds of cost. The first is the face: the sign itself, in the type you choose. Channel letters are built letter by letter. A cabinet is a box with a face panel. A panel is a flat board. Vinyl is lettering or graphics applied to a surface. Each type takes different material and shop time, so each one carries its own price per square foot in this calculator.
The second is illumination, when the sign is lit. The third is installation: getting the finished sign to the site and fixing it in place. The fourth is design: the layout and artwork work that happens before anything is cut or built.
This calculator asks you to enter each rate and fee yourself. That keeps the quote tied to your shop, your suppliers, and the job in front of you, rather than to a figure from somewhere else.
| Cost part | What it covers | Who sets the price |
|---|---|---|
| Sign face | The sign itself, priced from the area and your rate for the selected type | The sign shop |
| Illumination | Lights and wiring inside the sign, priced per square foot when the sign is lit | The sign shop |
| Installation | Travel, fitting, and fixing the finished sign in place | The sign shop |
| Design | Layout, proofs, and artwork files prepared before the sign is made | The sign shop |
The math
How the total is worked out
Start with the area. Multiply the width by the height to get square feet. Multiply that area by your rate for the selected sign type to get the face cost. If the sign is lit, add the area times your illumination adder. Then add install and design.
Total = Face cost + Illumination + Install + Design
Example: a sign with example measurements of 8 feet wide and 3 feet high has an area of 24 square feet. At an example panel rate of $50 per square foot, the face cost is $1,200. An example illumination adder of $10 per square foot adds $240. An example flat install fee of $300 and an example design fee of $150 complete the quote.
$1,200 + $240 + $300 + $150 = $1,890
On that example total, the price per square foot is $1,890 divided by 24, which is $78.75 per square foot. Every figure in this example is a made-up input chosen to show the math. Your total will use the rates and fees you enter. If you charge install as a percentage, the calculator works out that share from the face cost including illumination.
Getting it right
How to quote a sign accurately
The total is only as good as the figures behind it. Four steps keep a sign quote accurate and free of surprises later.
- 01
Measure the sign and the site
Measure the width and height where the sign will go, and check access for install at the same visit. A sign that needs extra access work costs more to fit. Record the measurements in feet so the area in the calculator matches the job.
- 02
Confirm the type before you price it
Channel letters, a cabinet, a panel, and vinyl are built in different ways and priced at different rates per square foot. Agree on the type with the customer first, then select that type and use your rate for it.
- 03
Settle illumination and power early
Ask whether the sign needs to be lit and where the power will come from. If it is lit, turn illumination on and enter your adder per square foot. Settling this early avoids adding it after the quote is agreed.
- 04
Show every line in writing
A clear quote lists the face, illumination, install, and design as separate lines, with the total and the price per square foot. If install is charged as a share of the face cost, state the percentage on the quote so the customer can follow the math.
Frequently asked questions
Straight answers to what buyers ask before they scope. Still stuck? .
- A sign price includes the sign face for the type you choose, any illumination you add, the work to install the sign, and any design work before it is made. Each part is priced separately in this calculator, so you can show the customer every line and change one line without redoing the whole quote.
- You measure the sign width and height in feet and multiply them to get the area in square feet. You then multiply that area by your price per square foot for the sign type you selected. A larger sign uses more material and more shop time, so the face cost rises with the area.
- Illumination adds the cost of the lights, wiring, and power parts inside the sign. In this calculator you enter your own adder per square foot and turn illumination on only when the sign is lit. The calculator multiplies the adder by the sign area and shows it as its own line.
- Shops charge for installation in two common ways. Some charge one flat amount for the visit and the fitting work. Others charge a share of the face cost. This calculator supports both: pick flat and enter the amount, or pick percent and enter your percentage of the face cost.
- A design fee covers the time spent turning an idea into a file the shop can build from. It can include layout, proof rounds, and preparing the artwork at the right size. Enter your own flat design fee in the calculator. If design is already covered elsewhere, leave it at zero.
- Yes. Enter your own price per square foot for each sign type you offer, your illumination adder, and how you charge for install and design. Measure the sign, select the type, and the calculator gives you an itemised quote with a price per square foot that you can share with the customer.
Stay on topic
More for sign teams
The tools give you a range. A call gives you a number.
30-minute scoping call. We will walk through how your shop handles quotes, proofs, and install schedules today, and you leave with a clear plan for the software that runs it.
