Makerspace machine rate calculator

Work out what one booked hour on a machine needs to cover: its purchase, maintenance, overhead share, and consumables. Every figure is your own, so the rate matches your space.

  • Break-even rate shown
  • Margin rate included
  • Monthly cost itemised

Before you run the numbers

One rate, every cost visible

A machine hour is not free just because the machine is already in the room. The machine cost money to buy, it costs money to maintain, it takes up space, and it uses materials as it runs. A rate that leaves out one of those parts looks fine until the machine needs repair or replacement.

This calculator keeps the parts separate. Enter your own figures for one machine and see the monthly cost, the booked hours, and the break-even hourly rate build up line by line.

Your numbers

1. The machine itself

years

2. Running costs

Leave at zero if you do not assign a share of space costs to this machine.

3. Bookable time and use

hrs
%

Booked hours are the bookable hours times the target utilisation. The monthly cost is spread over the booked hours only.

4. Margin (optional)

%

The margin is taken on the price. Leave at zero to see the break-even rate only.

Result

Break-even hourly rate

Enter your own figures on the left to see the rate.

Short answer

A makerspace machine rate calculator works out what one booked hour on a machine needs to cover: the machine purchase spread over its life, yearly maintenance, a share of space overhead, and consumables used per hour. Enter your own figures, your bookable hours, and your target use, and it shows your break-even hourly rate.

What the rate covers

What a machine hour really costs

The cost of a machine hour has two sides. One side is the monthly cost of having the machine at all. That cost runs whether the machine is booked or idle. It covers recovering the purchase price over the life of the machine, keeping it maintained, and the share of space costs you assign to it.

The other side is the time the machine is actually booked. The monthly cost is spread over the booked hours for the month, not over every hour the space is open. A machine that sits idle for most of its bookable hours carries its monthly cost on the few hours it does run.

Consumables sit apart from both sides. They are used only when the machine runs, so the calculator adds them per hour after the monthly cost has been spread over the booked hours. Keeping them as a separate line makes it clear what changes when use rises and what does not.

Cost partWhat it coversWhere the figure comes from
Machine recoveryThe purchase price spread over the life you expect from the machineYour purchase price and expected life in years
Maintenance shareOne month of the yearly cost of servicing, repairs, and parts that keep the machine runningYour maintenance cost per year
Space overhead shareThe share of rent and shared space costs you assign to this machine for the monthYour overhead allocation per month, if you use one
ConsumablesMaterials and parts used up in one hour of running the machineYour consumables cost per machine hour
Booked hoursThe hours the machine is actually booked in a month, after your target use level is appliedYour bookable hours and target utilisation

The math

How the hourly rate is worked out

First, work out the monthly machine cost. Spread the purchase price over the months in the life you enter, add one month of the yearly maintenance cost, and add the overhead share for the month. Next, work out the booked hours: the bookable hours for the month times the target use level.

Monthly cost = Purchase price / (Life in years x 12) + Maintenance per year / 12 + Overhead per month

Break-even rate = Monthly cost / Booked hours + Consumables per hour

If you set a margin, the rate at that margin takes the margin on the price. The break-even rate is divided by one minus the margin share, so the margin is a share of the rate charged, not an amount added on top of the cost.

Rate at margin = Break-even rate / (1 - Margin % / 100)

Example inputs: a machine with a purchase price of $12,000 and a life of 5 years, maintenance of $600 per year, and an overhead share of $150 per month. The same example uses bookable hours of 100 per month at a target use of 50 percent, and consumables of $2 per hour.

Monthly cost = $12,000 / 60 + $600 / 12 + $150 = $200 + $50 + $150 = $400

Booked hours = 100 x 50% = 50 hours. Break-even rate = $400 / 50 + $2 = $10 per hour

At an example margin of 20 percent, the rate at margin is $10 divided by 0.8, which is $12.50 per hour. Every figure in this example is a made-up input chosen to show the math. Your rate will use the figures you enter.

Setting the rate

How to set machine rates that hold up

A rate holds up when every figure behind it is one you can point to. Four steps keep it that way.

  • 01

    Start with the real purchase and life figures

    Use what the machine cost you and how long you expect it to stay in service. A shorter life raises the monthly recovery cost. A longer life lowers it. Be honest about life, because worn machines leave service sooner than the plan says.

  • 02

    Count maintenance as a monthly cost

    Servicing, repairs, and spare parts are part of the cost of an hour, even when the bill lands once a year. Enter the yearly figure you expect for this machine and let the calculator take one month of it.

  • 03

    Use a use level you can defend

    Bookable hours are the hours the machine could be booked. Booked hours are the share of those hours members actually take. Set the target use from your booking records where you can, so the rate rests on hours you expect to sell.

  • 04

    Review the rate when costs or use change

    A rate set once will drift out of line when maintenance rises, a machine is replaced, or booking patterns change. Run the numbers again when any of those things change, and adjust the rate before the gap grows.

Frequently asked questions

Straight answers to what buyers ask before they scope. Still stuck? .

It needs to cover the cost of owning and running the machine for one booked hour. That includes a share of the purchase price, maintenance, a share of the space overhead you assign to it, and the consumables used in that hour. This calculator adds those parts from figures you enter yourself.
First the calculator works out the monthly machine cost. It spreads the purchase price over the life you enter, adds one month of maintenance, and adds your overhead share. Then it divides that monthly cost by the booked hours for the month and adds your consumables cost per hour.
The monthly cost of the machine stays much the same whether it is booked often or rarely. When fewer hours are booked, that same cost is spread over fewer hours, so the cost per booked hour rises. When more hours are booked, the cost per hour falls. Enter the use level you plan for, not the best case.
Consumables are the materials and parts used up as the machine runs, such as blades, bits, nozzles, filters, or material the member does not supply. Enter your own cost for them per machine hour. If a member supplies all material and nothing is used up, leave the figure at zero.
The margin is taken on the price, not added on top of the cost. The calculator divides the break-even rate by one minus the margin share. So a margin of 20 percent means the break-even cost makes up 80 percent of the rate you charge. A margin of 100 percent or more has no valid rate.
Yes. Run it once for each machine, using that machine and its own bookable hours and use level. Machines with a higher purchase price or lower use will show a higher break-even rate. Running each machine on its own figures shows you which machines carry their cost and which do not.

The tools give you a range. A call gives you a number.

30-minute scoping call. We will walk through how your makerspace handles machine bookings, member access, and payments today, and you leave with a clear plan for the software that runs it.

See makerspace services