Painting cost calculator

Build a painting quote room by room: wall and ceiling area, coats, trim, and paint. Every price is your own, so the total matches the way you price work.

  • Up to 8 rooms
  • Per square foot or per room
  • Labour and paint split

Before you run the numbers

One total, every room visible

A painting quote is not one price. It is the walls in each room, any ceilings you include, the trim, the number of coats, and the paint itself. When those parts are bundled into a single figure, it is hard to tell what you are paying for.

This calculator keeps the parts separate. Add each room with its measurements, enter the prices you use, and see the total build up line by line, with a breakdown for each room.

Your numbers

1. Rooms

Room 1

Up to 8 rooms.

2. How you price labour

3. Coats and deductions

%
%

The per coat percentage is your own figure for how much each coat after the first adds to labour.

4. Trim

5. Paint (optional)

The paint line counts only when both figures are entered.

Result

Estimated total

Enter your own prices on the left to see the total.

Short answer

A painting cost calculator works out a painting quote from room sizes and your own prices. It measures wall and ceiling area room by room, applies your price per square foot or per room, adds coats, trim, and paint, and shows labour, materials, and total as separate lines.

What the cost covers

What goes into the price of painting?

The price of a painting job covers the labour for the walls, the labour for any ceilings you include, the trim, and the paint. Walls are measured room by room from the length, the width, and the wall height. Ceilings are measured from the length and width of the room, and only counted when you turn the ceiling option on for that room.

The number of coats affects both sides of the quote. More coats mean more labour time on the walls and ceilings, and more paint used. Trim is measured in linear feet, separate from wall area, and priced at its own rate per foot.

This calculator asks you to enter every price yourself. It does not fill in a price for labour, ceilings, trim, or paint, because those prices are yours to set for the job in front of you.

Cost partWhat it coversWho sets the price
Wall labourPainting the walls in each room, priced per square foot or per roomYou, with your own price
Ceiling labourPainting a ceiling where you turn the ceiling option on for a roomYou, with your own ceiling price per square foot
Extra coatsThe added labour for each coat beyond the first, at your own percentageYou, with your own per coat percentage
TrimSkirting, frames, and other trim, priced by the linear footYou, with your own price per foot
PaintThe gallons the job needs, from your coverage figure and your price per gallonYou, with your own paint figures

The math

How the total is worked out

For each room, wall area is 2 times the length plus the width, times the wall height. Ceiling area is length times width, counted only when the ceiling option is on. The total wall area then has your deduction percentage for doors and windows taken off.

The coat factor is 1 plus the number of added coats times your per coat percentage. In per square foot mode, wall labour is the wall area times your price per square foot times the coat factor, and ceiling labour is the ceiling area times your ceiling price times the coat factor. In per room mode, labour is the number of rooms times your per room price times the coat factor, stated plainly here so the two modes are easy to compare. Trim is trim feet times your price per foot. Paint is the wall and ceiling area divided by your coverage per gallon, times your price per gallon, times the number of coats, and it counts only when both paint figures are entered.

Total = Wall labour + Ceiling labour + Trim + Paint

Example, with every figure labelled as an example input: one room, example length 12 feet, example width 10 feet, example wall height 8 feet, ceiling on. Wall area is 352 square feet. Ceiling area is 120 square feet. An example deduction of 10 percent brings the wall area to 316.8 square feet. With an example price of $2 per square foot, an example ceiling price of $1.50 per square foot, example coats of 2, and an example per coat percentage of 50 percent, the coat factor is 1.5.

Wall labour $950.40 + Ceiling labour $270 + Trim $40 + Paint $99.84 = $1,360.24

The trim in that example is 40 feet at an example price of $1 per foot. The paint is 436.8 square feet divided by an example coverage of 350 square feet per gallon, times 2 coats, times an example price of $40 per gallon. Every figure in this example is a made-up input chosen to show the math. Your total will use the prices and measurements you enter.

Getting it right

How to get an accurate painting quote

The total is only as good as the measurements and prices behind it. Four steps keep a quote accurate and free of surprises later.

  • 01

    Measure each room on its own

    Rooms differ in size, wall height, and whether the ceiling is included. Measure length, width, and height for each room and add it as its own row. A single whole house area hides the rooms that take more time and more paint.

  • 02

    Set the deduction for doors and windows

    Doors and windows are wall area you do not paint. Enter the share of wall area they take up as your deduction percentage. The calculator takes that share off the total wall area before it prices the labour and the paint.

  • 03

    Agree the coats and the coat charge

    The number of coats changes both labour and paint. Enter the coats the job needs and your own percentage for what each added coat adds to labour. Agreeing both figures before work starts keeps the quote and the final bill aligned.

  • 04

    Keep labour and paint as separate lines

    A clear quote shows labour, ceilings, trim, and paint as separate lines. If a quote gives one lump sum, ask for the breakdown. The itemised total from this calculator gives you a layout to compare against, room by room.

Frequently asked questions

Straight answers to what buyers ask before they scope. Still stuck? .

A painting quote lists the wall labour, any ceiling work, trim work, and the paint itself as separate lines. Each line uses a price you set, so you can see what each part adds to the total. This calculator follows that same layout, room by room, and every price in it is one you enter yourself.
Add the length and the width, double that sum, then multiply by the wall height. For a room that is 12 feet long, 10 feet wide, and 8 feet high, the wall area is 2 times 22 times 8, which is 352 square feet. The calculator does this for each room, then takes off the deduction percentage you set for doors and windows.
Pricing per square foot ties the labour charge to the measured wall and ceiling area, so a larger room costs more than a smaller one. Pricing per room charges one amount for each room, whatever its size. This calculator supports both. Pick the mode you use, then enter your price per square foot or your price per room.
Each extra coat adds labour, but you decide how much. Enter the number of coats and your own percentage for how much each added coat adds to labour. The calculator builds a coat factor from those two figures and applies it to the wall, ceiling, and per room labour. It also multiplies the paint amount by the number of coats.
Divide the total wall and ceiling area by the coverage figure for the paint you use, then multiply by the number of coats. That gives the gallons the job needs. Enter your price per gallon and your coverage per gallon, and the calculator adds a materials line. If either figure is left empty, no materials line is added.
Yes. Enter your own price per square foot or per room, your ceiling price, your trim price per foot, and your coat percentage. Add each room with its measurements, and the result is an itemised quote with a per room breakdown the customer can read line by line.

The tools give you a range. A call gives you a number.

30-minute scoping call. We will walk through how your team handles quotes, schedules, and job tracking today, and you leave with a clear plan for the software that runs it.

See painting services