Property Preservation Software

Property preservation software that keeps every work order on one record.

Your crews secure, winterize, and maintain vacant properties for banks and mortgage servicers, but the proof of that work sits in texts, email threads, and spreadsheets. We build software that puts the scope, the photos, the cost limit, and the invoice on one work order record your office can check.

See our work

Bring one stuck workflow. Leave with a build, buy, repair, or wait recommendation.

Trusted by

Perceptional logoMusgrave GroupUrShipper logoBrux Dental SolutionsBella Skin Institute LogoEnergia RewardsDraftly logoTuneClub LogoSekou LMS logoLogo of food order management app gulaSnelwegDealsGrubly logoPSi logoInstantor Rewards logologo of Mobile app for events, membership clubs, and communitiesAldiFest retail campaign logoVidmattic logoEMS Connect logoWorx Squad logologo of Online Web App For Making Intrologo of Referral and Viral Marketing PlatformConcurrences logoGE logoTicketstop logo

The brief

Start with what is not working.

Good software decisions begin with the constraint, not a list of features or a preferred technology.

01

A work order is done in the field, but the photos, estimate, and invoice sit in three different places.

02

Crews finish work over the cost limit because nobody saw the limit until the invoice came back.

03

Office staff rebuild the same job by hand before it can go to the client for review.

Plain answer

Property preservation software puts every bank and servicer work order on one record: the scope, the crew assigned, the not-to-exceed limit, before and after photos, the estimate, office review, and the invoice. RaftLabs builds it around how your company already runs orders, so nothing lives in texts, email, or spreadsheets.

What to remember

  • Use this when work orders repeat at volume and the proof of work is scattered across messages.
  • The first release should carry one work order from intake to invoice, not collect disconnected features.
  • Every order needs its scope, cost limit, photo set, and review state visible on the same record.
  • The code, cloud accounts, data, and operating notes should stay usable by another capable team.
  • Hire freelancers for one small, well-defined task; use one accountable agency party when the work needs coordination across screens, rules, data, and connections.

Fit

Custom software should earn its maintenance burden.

A feature request is not enough. The case is real when the same constraint shows up in time, errors, margin, or rejected work.

A fit

Work orders repeat at volume, and each one needs scope, photos, an estimate, review, and an invoice to agree with each other.

Your clients each set different photo, form, and cost rules, and your office rebuilds jobs by hand to meet them.

The organisation can name a workflow owner and what 'done' looks like for the first release.

Not a fit

A maintained product fits your clients and crew flow with reasonable configuration and process change.

The team wants software to settle an unresolved argument about how orders should be run.

The brief is a feature list with no work order, user, or business result attached.

Not sure which side you are on? Use the first call to make that decision. A useful answer may be to buy, connect, repair, or wait.

Start with the work order, not the software.

A preservation problem usually starts as a paper problem. A bank or servicer sends a work order. A crew secures the property, changes the locks, winterizes the pipes, cuts the grass, or clears debris. Then the proof of that work has to travel back: photos in a text thread, an estimate in an email, the cost limit in a spreadsheet, the invoice somewhere else. Nobody can see the whole job in one place.

The order gets judged on its record, not on the work. A reviewer checks whether the before and after photos prove each task, whether the cost stayed inside the limit or carries an approval, and whether the notes match the scope. When one piece sits in a different chain of messages, good field work still comes back for rework, and payment waits.

A second product hides inside the first. Clients see a submission; your team lives in the review queue: checking photo sets, chasing missing shots, matching invoices to approvals, and keeping a record of who did what. Quotes that squeeze all of that into an "admin panel" line item are where budgets most often break, so we quote your team's screens as their own job, with their own users, from the start.

Custom property preservation software makes sense when one owned system can hold the whole order better than a product, a connector, or a process change. The first release should take one work order from intake to invoice. It should not replace every tool at once.

We start where it hurts.

The screen is only one part of the job. The real scope includes the scope of work, the cost limit, the photo rules, the review, the connections to your client systems, and who runs it after release.

Work orders scattered across messages

Put intake, assignment, scope, and due date on one record, so the office stops rebuilding each job from texts, email, and spreadsheets before anyone can review it.

Photo evidence that gets orders rejected

Check each photo set against the rules for that client and that task while the crew is still near the property: identification, before, during, and after shots, with the date stamp and labels the client requires.

Cost limits nobody sees in time

Show the not-to-exceed limit on the order itself. Work beyond the scope gets photographed and estimated from the field, and the office approves it before it happens, not after the invoice lands.

Office review that closes the loop

Give reviewers one queue where the scope, photos, estimate, and approval state already agree, so an order is ready for office review in one pass or goes back with a named reason.

A record you keep, whatever clients do

Your orders, photos, estimates, and invoices stay in your system under your accounts, so proof of completed work survives the end of any single client relationship.

Which one is yours?

Bring it to a 30-minute call. Leave with a build, buy, repair, or wait recommendation in writing. Free, whether or not we ever work together.

The work

One record for every kind of order.

Securing, winterization, lawn work, and debris removal look different in the field. On the record they need the same things: a clear scope, a cost limit, proof, review, and an invoice that matches.

Securing and lock changes

The order carries the property, the access notes, and the lock and boarding scope. Photos prove the property identity and the secured state, and the record shows who attended and when.

Winterization

The checklist follows the systems in the property, and each step gets its own photo evidence. A step that cannot be completed becomes a flagged condition with a photo, not a gap found at review.

Lawn and debris work

Before photos establish the condition and the volume. After photos come from the same angles, so the reviewer can compare without guessing, and extra volume becomes an estimate before it becomes a dispute.

Inspections and condition reports

Findings land on the order as structured notes with labelled photos, in the order a reviewer reads them. Damage that needs a bid becomes its own item with its own evidence.

Repairs and bids

Each bid line carries the photo that supports it and the approval state against the cost limit. Approved, declined, and pending work stay separate, so crews only do work that someone has agreed to pay for.

Recurring maintenance

Repeat visits inherit the property record and its history, so a crew sees what was done last time and the office sees the pattern across visits instead of a pile of separate orders.

Proof

The fifth attempt became a product customers could keep using.

UrShipper had already worked with four development vendors. Its founder describes the communication and decisions during the recovery.

The case study documents a 14-week recovery, five carrier connections, a Shopify fulfilment workflow, and client-reported results. It is one comparable project, not a promise that every inherited codebase can follow the same plan.

Read the UrShipper case study

Which workflow is costing you the most right now?

Bring it to a 30-minute call. Leave with a build, buy, repair, or wait recommendation in writing. Free, whether or not we ever work together.

How it works

Close one expensive risk before opening the next.

Each stage answers a buyer question and leaves behind a decision you can inspect. The next stage only opens when the expensive uncertainty in the current one is small enough to accept.

  1. 01
    Understand

    Trace one real work order

    Where does an order actually break down?

    Follow one work order and one crew from the day the order arrives to the day the invoice is paid. Include the texts, the re-sent photos, the estimate that waited for approval, and the review that sent the job back.

    Decision produced

    A map of one order from intake to invoice: the handoffs, the photo rules, the cost approvals, and where the record splits across messages.

    Risk closed

    Paying to automate the visible symptom while the expensive constraint remains.
  2. 02
    Shape

    Choose the first useful release

    What needs to exist together for one order to complete?

    Choose the shape from the way the work happens, not from a preferred technology. Name the users, the devices in the field, the photo and cost rules, the system connections, who can access what, the exceptions, and the result the first release must complete.

    Decision produced

    The first-release boundary: intake, assignment, field capture, office review, and invoicing for one client flow, with a clear definition of done.

    Risk closed

    A small-looking feature list that quietly depends on several client rule sets, systems, and owners.
  3. 03
    Prove

    Review working software

    Will it hold up on a real order, with a real crew?

    Review the product against the agreed workflow, not a tour of finished screens. Run orders with missing photos, work over the cost limit, and no signal in the field, and record what the system does in each case.

    Decision produced

    Working checkpoints tested with real work orders, real photo sets, real cost limits, and the office staff who will review them.

    Risk closed

    Discovering the important gaps after crews depend on the release.
  4. 04
    Transfer

    Release, measure, and hand over

    Did orders move faster with fewer returns, and can another capable team operate it?

    Move one client flow or one region first. Compare review time, returned orders, and time to invoice with the starting point before adding the next client.

    Decision produced

    A controlled release, comparison with the starting point, operating notes, account ownership map, and a recommendation for what should happen next.

    Risk closed

    Measuring development activity instead of the business result, or depending on the original vendor to keep the system running.

What it costs

Every project starts at $10K.

The first phase turns the costliest patched workflow into a scoped build with written acceptance criteria.

Starting investment

Starts at $10K

Workflow complexity, systems to connect, data migration, and user roles set the scope. After a 30-minute call, you get a written build, buy, repair, or wait recommendation plus first-phase direction. Free, whether or not you build with us.

Work with us

Bring one stuck workflow. Leave with a decision.

In a 30-minute call, we will help you decide whether to buy, connect, repair, build, or wait. If custom software is not the sensible next move, that is still a useful answer.

  • One named workflow owner and one complete path for the first phase.
  • Scope, price, what 'done' looks like, and exclusions agreed before paid work starts.
  • Code, cloud, data, and provider access remain under your control.
  • Post-launch warranty cover for defects in the agreed scope.

Frequently asked questions

Straight answers to what buyers ask before they scope. Still stuck? .

It is the system a preservation company uses to run work orders from banks and mortgage servicers: intake, assigning a crew, the scope of work, the not-to-exceed cost limit, before and after photos, the estimate, office review, client submission, and the invoice. Custom property preservation software is built around your clients, your crews, and your review rules, for when a general field service tool no longer fits.

Buy an existing product when it handles your work order flow with reasonable setup and its pricing makes sense. Build custom when your clients each demand different photo sets, forms, and cost rules, when your office rebuilds every job by hand before submission, or when a critical connection to a client system cannot be done cleanly any other way. If your clients and their rules are still changing every week, wait and settle them first.

The cost limit sits on the work order itself, where the crew and the office both see it before work starts. When a crew finds more work than the scope covers, they photograph it and send an estimate from the same record. The office approves or declines it before the extra work happens, so the invoice never arrives as a surprise and the client sees the approval trail.

Each task needs photos that prove the work: a shot that identifies the property, before photos of the condition as found, during photos of the work happening, and after photos from the same angle as the before shots. Many clients also require a date stamp inside the image and a label on each photo. The software checks the set against the client rules for that order before the office reviews it, so a missing before photo is caught while the crew is still near the property.

It means the work order arrives at your office complete enough to judge in one pass: scope items matched against completion notes, the full photo set present, the estimate inside the cost limit or flagged with its approval, and any damage or condition issue raised as its own item. Your reviewer approves it for client submission or sends it back with a named reason, instead of chasing the crew through texts.

Yes, for workflows designed for it. The crew app stores the work order and queues photos and notes on the phone, then sends them when signal returns. The crew can see what is saved, what is still waiting to send, and what failed. Photo sets are large, so the design has to handle file size, a dying battery, and a lost phone without losing the record of a finished job.

Yes. Your work orders, photos, estimates, and invoices live in your system, under accounts you control. That record is your proof of completed work if a client disputes payment months later. Keeping your own copy, separate from any client portal, is what protects you when access to someone else's system is switched off.

Yes, if the rules are modelled per client from the start. Each client can carry its own required photo sets, forms, cost limits, and submission format, and the work order shows the crew only the rules for that client. This is usually the point where a general tool starts to strain, because the differences live in your operation, not in a settings page.

For a small, well-defined task with someone technical managing it, freelancers are often cheaper. The pattern that goes wrong is a non-technical buyer coordinating several freelancers becoming the project manager, the tester, and the person who discovers the pieces do not fit. A software company earns its fee when the work needs coordination across screens, rules, data, and connections: one accountable party, one phase price, and checkpoints against the whole workflow. If your need is one screen or one fix, hire the freelancer.

The first paid phase may cover a bounded audit, a proof of concept, a recovery plan, or a small first release. The final price depends on how deep the work order flow goes, how many kinds of users it serves, what it needs to connect to, whether records need moving over, and whether a field app for phones is involved. The agreed phase is priced in writing before it starts.

Timing depends on scope: a bounded audit or proof of concept is a smaller engagement, while a system with several client connections, records to move over, and a field app takes longer. The schedule is set once the first workflow and what 'done' looks like are clear.

Yes. Takeover is a common first engagement, and it always starts with an audit: where the code lives, how your data is organized, what is tested, which outside services it depends on, who can access what, and how updates go live. Code that is understandable and fit for the next release stays; only the parts blocking reliability get replaced. If you already paid another vendor and have nothing working, the audit tells you what you actually have before you spend more.

Security starts with the data, the people, who can see and change what, the systems it connects to, and where it runs. The scope can include access controls, separate testing and live environments, protected passwords and keys, activity logs, backups, recovery plans, and whatever your clients require. We write down which protections are included and which evidence your team must provide. We do not call a product compliant until the technical, operational, and legal requirements are all verified.

We need one person who owns the workflow, access to the relevant users and systems, timely answers on business rules, and someone who can accept or reject each milestone. A weekly working session is usually enough once the scope is stable. Your team should not have to manage developers day to day. The team that scopes your project is the team that does the work: no handoff to another vendor after you sign, and you can talk to the people doing the work directly.

Ask for the quote to name everyone who will use the system, including your own team. Every platform has two products: what clients see, and what your people use all day: review queues, exceptions, managing crews and users, and a record of who did what. When that second product is quoted as an 'admin panel' on a single line, it becomes the overrun. Our quotes treat your team's screens as their own scope, with their own users. Then the phase names the workflow, what 'done' looks like, the price, and the exclusions, all before paid work starts.

You judge what you can see, not the code. Every checkpoint is working software you click through yourself, tested against the workflow agreed at the start: take one real work order from intake to invoice and see if anything falls off the record. Progress is reported in plain language: what changed, what is next, and what it costs. Because you own the code, the accounts, and the operating notes throughout, nothing about the work is locked inside our heads.

You own the code built for you and control where it lives, the cloud accounts, the data, analytics, and third-party subscriptions. Outside services and open-source pieces keep their own licence terms. The operating notes and handover material stay current so another capable team can take over.

Every launch includes post-launch warranty cover for defects in the agreed scope, release support, and small screen corrections. After that, work can continue as another fixed phase or an ongoing product engagement. The code and accounts stay under your control either way.