Propane usage calculator

See how much propane is left in your tank, how many days it will last at your own rate of use, and what a refill will cost at your price per gallon.

  • Your tank and gauge
  • K-factor or daily use
  • Refill cost included

Before you run the numbers

What is in the tank, and how long will it last?

A tank gauge shows a percentage, not a plan. It does not tell you how many gallons you hold, how fast you are using them, or what the next fill will cost. Those three answers decide when you order and what you budget.

This calculator turns your gauge reading into gallons, your own rate of use into days of supply, and your price per gallon into a refill cost. Every figure comes from you, so the answers fit your tank and your home.

Your numbers

1. Your tank

%
%

Leave at zero if you fill the tank to full. If you set a limit, the refill target uses that level instead of a full tank.

2. How you use propane

Use degree-days and days from the same period, so the daily use figure is sound.

3. Your price

Enter the price on your own bill or quote, in the currency you pick above.

Result

Estimated refill cost

Enter your tank size, gauge reading, and your own use figures on the left to see the result.

Short answer

A propane usage calculator works out how much propane is left in your tank, how many days that supply will last at your own rate of use, and what a refill will cost at your price per gallon. Every figure is one you enter, so the result reflects your own tank and use.

What the result covers

What does the propane usage calculator cover?

The calculator covers four things, starting with the gallons in your tank right now, from your tank size and your gauge reading. Your daily use comes next, worked out in the way you choose: from your K-factor and the degree-days for a period, or from your own figure for gallons per day.

The days of supply show how long the gallons in the tank will last at that daily use. The refill shows how many gallons it takes to reach your fill level, and what those gallons cost at your price per gallon.

The calculator does not guess any of these figures for you. Your K-factor comes from your delivery history, your degree-days come from your weather source, and your price comes from your bill. That is what makes the result yours rather than a guess about homes in general.

Part of the resultWhat it coversWhere the figure comes from
Gallons in the tankYour tank size times your current gauge readingYou, from your tank and gauge
Daily useYour use per day, from your K-factor and degree-days or from your own gallons per dayYou, from your delivery history or weather source
Days of supplyThe gallons in the tank divided by your daily useWorked out by the calculator
Refill costThe gallons needed to reach your fill level, times your price per gallonYou set the price; the calculator does the sum

The math

How the days of supply and refill cost are worked out

The math has four short steps. Gallons in the tank is the tank size times the gauge percentage. Daily use in K-factor mode is the degree-days times your K-factor, divided by the number of days in the period. Days of supply is the gallons in the tank divided by the daily use. The refill cost is the gallons needed to reach your fill level times your price per gallon.

Gallons in tank = Tank size x Gauge % | Daily use = (Degree-days x K-factor) / Period days | Days of supply = Gallons in tank / Daily use | Refill cost = Gallons to add x Your price per gallon

Example: a tank of an example size of 500 gallons with an example gauge reading of 40% holds 200 gallons. Example degree-days of 600 with an example K-factor of 0.1 over an example period of 30 days gives 60 gallons of use over the period, which is 2 gallons per day. The days of supply are 200 divided by 2, which is 100 days.

500 x 40% = 200 gallons | (600 x 0.1) / 30 = 2 gallons per day | 200 / 2 = 100 days

For the refill, an example fill limit of 80% sets the target at 400 gallons, so the gallons to add are 400 minus 200, which is 200 gallons. At an example price of $2.50 per gallon, the refill cost is $500. Every figure in this example is a made-up input chosen to show the math. Your result will use the figures you enter.

500 x 80% = 400 gallons | 400 - 200 = 200 gallons to add | 200 x $2.50 = $500

Using the calculator

How to check your propane supply in four steps

You need your tank size, a gauge reading, and one way of tracking your use. Four steps turn those into a plan.

  • 01

    Read your tank gauge

    Find the gauge on your tank and note the percentage it shows. Enter your full tank size in gallons and that gauge percentage. The calculator turns the two into the gallons you have left.

  • 02

    Pick how you track your use

    If your supplier has given you a K-factor, choose the K-factor mode and add the degree-days and the number of days for the same period from your weather source. If you track your use another way, choose the other mode and enter your own gallons per day.

  • 03

    Add your fill level and price

    If your supplier fills only to a set level, enter that percentage as your fill limit. Leave it blank if you fill to full. Then enter your price per gallon, the price on your own bill.

  • 04

    Read the days and plan the refill

    The result shows the gallons left, the days of supply at your rate of use, and the cost to fill to your level. Order with time to spare, so a cold spell or a late delivery does not leave you short.

Frequently asked questions

Straight answers to what buyers ask before they scope. Still stuck? .

It starts with the gallons in your tank, which is your tank size times your gauge reading. It then works out your daily use, either from your K-factor and degree-days or from your own figure for gallons per day. Dividing the gallons in the tank by the daily use gives the days of supply. The refill cost is the gallons needed to reach your fill level times your price per gallon.
A K-factor is your own figure for how many gallons of propane your home uses for each heating degree-day. It comes from your delivery history: your supplier can often tell you yours, or you can work it out from past deliveries and the weather over the same period. Enter your own K-factor in the calculator. The tool does not supply one for you.
A heating degree-day is a measure of how cold a day was, used to track heating demand over a period. Weather services publish degree-day figures for your area. Add up the degree-days for the period you want to check, count the days in that period, and enter both figures in the calculator along with your K-factor.
You have two choices in this calculator. If you know your K-factor, use the K-factor mode with the degree-days and the number of days for the same period. If you already track your use, use the other mode and enter your own figure for gallons used per day, worked out from your past deliveries divided by the days they covered.
The calculator works out the gallons needed to bring your tank up to your fill level. If you set a fill limit, that level is your target. If you leave it blank, the target is a full tank. It then multiplies the gallons to add by your price per gallon. Enter the price your supplier charges you, so the cost matches your own bill.
Yes. A delivery company can enter a customer tank size and gauge reading, the customer rate of use, and the company price per gallon. That shows the customer how many days of supply are left and what the next fill will cost. Because every figure is entered by hand, the same page works for a homeowner checking a tank and a driver planning a route.

The tools give you a range. A call gives you a number.

30-minute scoping call. We will walk through how your team handles tank readings, delivery routes, and refill orders today, and you leave with a clear plan for the software that runs it.