Mobile mechanic quote calculator
Build a mobile mechanic quote line by line: labour, each part with your markup, the travel fee, and the diagnostic fee. Every figure is your own, so the quote matches the job in front of you.
- Labour and parts split shown
- Parts list with your markup
- Diagnostic credit toggle
Before you run the numbers
One quote, every line visible
A mobile mechanic quote is not one price. It is labour, a list of parts, the cost of travelling to the vehicle, and sometimes a fee for finding the fault. When those lines are bundled into a single figure, the customer cannot tell what they are paying for.
This calculator keeps the lines separate. Enter your own rate, your parts costs, and your fees, and see the quote build up line by line, with the labour and parts split shown at the end.
Your numbers
1. Labour
2. Parts
3. Travel and diagnostic fees
Result
Estimated quote total
Enter your own figures on the left to see the quote.
Short answer
A mobile mechanic quote calculator adds labour from your rate and job hours to parts with your markup, plus travel and diagnostic fees. It lists each part and fee on its own line, shows the labour and parts split, and gives one clear total.
What the quote covers
What goes into a mobile mechanic quote?
A mobile mechanic quote covers four kinds of cost. The first is labour: the time the job takes, priced at the rate per hour you set. The second is parts. Each part is listed by name at your cost, and your markup is added on top of the parts sum.
The third is the travel fee, sometimes called a call-out fee. It covers getting to where the vehicle is, which is a real cost for a mobile mechanic and not for a workshop. The fourth is a diagnostic fee for finding the fault.
Some mechanics credit the diagnostic fee against the job when the customer goes ahead with the repair. In that case the fee is still listed, but it adds zero to the total. This calculator has a toggle for that choice, so the quote shows clearly whether the fee was charged or credited.
| Cost part | What it covers | Who sets the price |
|---|---|---|
| Labour | The mechanic time for the job, from your rate per hour times the job hours | The mechanic |
| Parts | Each part on the list at your cost, with your markup added on top | The mechanic |
| Travel fee | The call-out cost of getting to where the vehicle is | The mechanic |
| Diagnostic fee | The fee for finding the fault, shown as zero in the total when it is credited against the job | The mechanic |
The math
How the total is worked out
Labour is your rate per hour times the job hours. Parts are the sum of every part cost on the list, with your markup percentage added on top. The quote then adds the travel fee and the diagnostic fee, unless the diagnostic fee is credited, in which case it adds zero.
Quote = Labour + Parts with markup + Travel fee + Diagnostic fee
Example, using example inputs only: a labour rate of $90 per hour for 2.5 hours gives labour of $225. Parts at example costs of $120 and $60 add up to $180, and an example markup of 25 percent brings the parts total to $225. An example travel fee of $49 and an example diagnostic fee of $79, not credited.
$225 + $225 + $49 + $79 = $578
The quote total is $578. Every figure in this example is a made-up input chosen to show the math. Your total will use the figures you enter.
Getting it right
How to get an accurate mobile mechanic quote
The total is only as good as the figures behind it. Four steps keep a quote accurate and easy for the customer to follow.
- 01
List every part before you price it
Add one row for each part the job needs, with the part name and your cost for it. A named list stops parts being lumped into one vague figure, and the customer can see exactly what is being fitted.
- 02
Set the markup once and keep it visible
Enter the markup percentage you use and let the calculator apply it to the parts sum. The result shows the parts total after markup, so the customer sees one clear parts line instead of a hidden adjustment.
- 03
Agree the diagnostic credit up front
Say before the visit whether the diagnostic fee is credited when the repair goes ahead. Set the toggle in the calculator to match what you agreed, so the total the customer sees is the total they will pay.
- 04
Show the labour and parts split
The result shows how much of the quote is labour and how much is parts. That split helps the customer understand the quote and helps you check that the balance between time and parts looks right for the job.
Frequently asked questions
Straight answers to what buyers ask before they scope. Still stuck? .
- A mobile mechanic quote lists the labour for the job, each part needed with its cost, any markup on parts, the travel fee for coming to the vehicle, and a diagnostic fee if one applies. Each item sits on its own line, so the customer can see what the total is made of before agreeing to the work.
- The calculator adds up the cost of every part on the list, then adds your markup percentage on top of that sum. For example, parts that cost you 180 with a 25 percent markup become 225 in the quote. You set the markup yourself, and the result shows the parts total after markup.
- A diagnostic fee covers the time and equipment used to find the fault before repair work starts. Some mechanics credit that fee against the job, which means it comes off the bill when the customer goes ahead with the repair. Use the credited toggle in the calculator to show the fee as zero in the total when it is credited.
- A call-out or travel fee covers the cost of getting the mechanic and the tools to where the vehicle is. That includes drive time and fuel, which a workshop does not have to spend because the vehicle comes to it. Enter your own travel fee and it appears as its own line in the quote.
- A workshop quote is built around a fixed site, where the vehicle is brought in and the equipment is already there. A mobile quote has to count travel to the vehicle and the time to find the fault on site. The parts and labour are worked out the same way, but the travel and diagnostic lines are what make a mobile quote different.
- Yes. A mechanic can enter the labour rate, the job hours, and the parts list while standing with the customer, then show the itemised quote on the screen. Because every figure is one the mechanic enters, the quote can be adjusted on the spot if the job changes.
Stay on topic
More for mobile mechanic teams
The tools give you a range. A call gives you a number.
30-minute scoping call. We will walk through how your business handles bookings, quotes, and jobs today, and you leave with a clear plan for the software that runs it.
