Hot tub running cost calculator
Work out what a hot tub costs to run from your own tariff and usage: electricity, water care, filters, and service visits. Every figure is yours, so the total matches your own bills.
- Your own tariff
- Energy and water care
- Filters and service included
Before you run the numbers
One total, with running and service kept apart
The cost of a hot tub is not one bill. Electricity and water care arrive every month. Filters and service visits arrive a few times a year. When those are mixed together, it is hard to see what the tub costs to run day to day and what it costs to look after.
This calculator keeps the two apart. Enter your tariff, your daily use, and your own spend, and see the monthly running cost, the annual running cost, the annual service cost, and the total for the year.
Your numbers
1. Electricity
Use the tariff from your own bill and the daily use from your own meter, manual, or smart plug reading.
2. Water care
3. Filters
4. Service visits
Result
Annual total
Enter your own figures on the left to see the total.
Short answer
A hot tub running cost calculator adds up what it costs to keep a tub ready to use: the electricity for heating and running the pump, the water care products you buy each month, plus filter changes and service visits across the year. Every figure is one you enter, so the total reflects your own costs.
What the running cost covers
What goes into the running cost of a hot tub?
The running cost covers four kinds of cost. The first is electricity. The tub uses electricity to heat the water and to run the pump and jets. That cost depends on two figures from you: your price per kWh and how many kWh the tub uses each day.
The second is water care. These are the products you buy each month to keep the water clean and balanced. Enter what you spend, not a figure from a shop list.
The last two costs are counted across the year. Filter replacements are the number of filters you change in a year times your price for each filter. Service visits are the number of visits in a year times your price for each visit. Together they form the annual service cost, which this calculator shows separately from the annual running cost.
| Cost part | What it covers | Who sets the price |
|---|---|---|
| Electricity | Heating the water and running the pump and jets | Your electricity supplier sets the tariff, you supply the daily use |
| Water care products | Products you buy each month to keep the water clean and balanced | You, based on what you buy |
| Filter replacements | New filters during the year, counted as number per year times your price each | You, based on your filter price |
| Service visits | Visits during the year, counted as visits per year times your price per visit | You or your service company, based on the visit price you enter |
The math
How the total is worked out
Monthly energy is your daily kWh use times 30 days times your tariff. Monthly running cost is monthly energy plus your water care spend for the month. Multiplying monthly running cost by 12 gives the annual running cost. For service, add visits times your visit price to filters per year times your filter price. That sum is the annual service cost. The annual total is annual running cost plus annual service cost.
Monthly energy = Daily kWh x 30 x Tariff. Monthly running = Energy + Water care. Annual service = Visits x Visit price + Filters x Filter price. Annual total = Monthly running x 12 + Annual service
Example: an example tariff of $0.30 per kWh and example daily use of 5 kWh. Monthly energy is 5 x 30 x $0.30, which is $45. With example water care of $40 per month, monthly running cost is $85. Annual running cost is $85 x 12, which is $1,020.
Example service: 2 visits at an example price of $150 each is $300, plus 2 filters at an example price of $25 each is $50. Annual service cost is $350. Annual total is $1,020 plus $350, which is $1,370.
$45 + $40 = $85 per month. $85 x 12 = $1,020. $300 + $50 = $350. $1,020 + $350 = $1,370 per year
Every figure in this example is a made-up input chosen to show the math. Your total will use the tariff, usage, and prices you enter.
Getting it right
How to keep the estimate honest
The total is only as good as the figures behind it. Four steps keep the estimate close to your own bills and receipts.
- 01
Use the tariff from your own bill
Enter the price per kWh from your current bill or supplier account. If you have more than one rate, pick the rate that applies when the tub is heating and note which one you used, so you can check the result later against the same rate.
- 02
Base daily use on your own reading
Take daily use from your manual, your meter, or a smart plug reading over a few days. Write down the period you measured. A reading from your own tub will give a closer result than a figure from another tub.
- 03
Count water care from what you buy
Add up the water care products you bought in the month you are planning for. Use receipts or bank records where you can. If you buy some products less often, spread that spend across the months it covers before you enter the monthly figure.
- 04
List filters and visits for a full year
Enter the number of filter changes and service visits you expect in a full year, with your price for each one. Keeping those as an annual service line stops a quiet month from looking cheaper than the year really is.
Frequently asked questions
Straight answers to what buyers ask before they scope. Still stuck? .
- It includes the electricity used to heat the water and run the pump, the water care products you buy each month, the cost of replacing filters during the year, and what you pay for service visits. This calculator adds those parts together from figures you enter, so you can see the monthly running cost and the total for the year.
- Look at your electricity bill or your supplier account. The bill shows a price for each unit of electricity, listed as a price per kWh. Enter that price in the calculator as your tariff. If your bill shows more than one rate, use the rate that applies when the tub heats, or ask your supplier which rate to use.
- Check the tub manual for its power use, or read your meter or smart plug over a few days and divide the total by the number of days. Enter that figure as your daily kWh use. The calculator multiplies it by 30 days and by your tariff to give the monthly energy cost.
- Water care cost is what you spend each month on the products that keep the water clean and balanced, such as sanitiser, balancer, and test supplies. Add up what you actually buy in a month and enter that spend. If your spend changes across the year, enter the month you want to plan for and run the calculator again for another month.
- Filters and service visits are paid a few times a year rather than every month, so the calculator counts them as an annual service cost. Enter how many filters you replace in a year and your price for each one, plus how many service visits you have and your price for each visit. That annual service cost is shown separately from the annual running cost.
- Yes. A service company can enter a customer tariff, daily use, water care spend, filter price, and visit price. It can then show the customer the monthly running cost, the annual total, and how much of that total is running cost and how much is service. Because every figure comes from the customer, the conversation stays on their own bills and prices.
Stay on topic
More for hot tub and spa teams
The tools give you a range. A call gives you a number.
30-minute scoping call. We will walk through how your business handles bookings, service visits, and running cost questions today, and you leave with a clear plan for the software that runs it.
