Pool route profitability calculator
See what your route actually earns. Enter your stops, your price per stop, service and drive time, tech pay, chemicals, and vehicle cost, and get monthly profit, margin, and profit per stop.
- Your own prices only
- Drive time counted
- Profit per stop shown
Before you run the numbers
Revenue is not profit
A full route can still lose money. Revenue counts only what stops pay. Profit also has to cover the tech time at each pool, the time spent driving between pools, the chemicals used, and the miles the vehicle runs each week.
This calculator keeps those lines separate and uses only your figures. Enter your own price, pay, times, and costs, and see where the money on your route goes.
Your numbers
1. The route
2. Time and pay
Labour hours count both service minutes and drive minutes for every visit.
3. Chemicals and vehicle
Vehicle cost is worked out monthly: route miles per week times 4.33 weeks, times your cost per mile.
Result
Monthly route profit
Enter your own route figures on the left to see the profit.
Short answer
A pool route profitability calculator works out monthly profit for a pool service route from your own numbers: stops times your monthly price for revenue, minus labour for service and drive time, chemicals, and vehicle cost. It also shows margin, profit per stop, and tech hours per week.
What route profit covers
What goes into profit on a pool route?
Route profit starts with revenue: the stops on the route times the price you charge per stop per month. That is the top line. Everything after it is a cost of running the route itself.
Labour is usually the largest cost. It covers both the minutes spent servicing each pool and the minutes spent driving to the next one, for every visit in the month. Chemicals are the cost of treating each stop across the month. Vehicle cost covers the miles the route runs each week, including fuel and wear, at your own cost per mile.
Take labour, chemicals, and vehicle cost away from revenue and you get route profit before overhead. Office rent, insurance, software, and other business costs sit outside this sum. That makes the result useful for comparing routes with each other and for seeing which cost line is pulling a route down.
| Route line | What it covers | Set by |
|---|---|---|
| Revenue | Stops on the route times your price per stop per month | Your route and your prices |
| Labour | Service minutes plus drive minutes for every visit, at your tech pay per hour | Your times and your pay rate |
| Chemicals | Your chemical cost per stop per month times the number of stops | Your chemical spend per stop |
| Vehicle | Route miles per week times 4.33 weeks, at your vehicle cost per mile | Your route miles and your cost per mile |
| Route profit | Revenue minus labour, chemicals, and vehicle cost, before other overhead | The sum of the lines above |
The math
How route profit is worked out
Monthly revenue is stops times your price per stop per month. Monthly labour hours are stops times service minutes plus drive minutes, times visits per stop per month, divided by 60. Labour cost is those hours times tech pay. Chemical cost is stops times your chemical cost per stop. Vehicle cost is route miles per week times 4.33 weeks in a month, times your cost per mile.
Profit = Revenue - Labour - Chemicals - Vehicle
Example, using example inputs only: 50 stops at an example price of $200 per stop per month gives revenue of $10,000. Service time of 20 example minutes plus 10 example drive minutes, at 4 example visits per stop per month, gives 100 labour hours. At an example pay rate of $30 per hour, labour is $3,000. Chemicals at an example $30 per stop per month come to $1,500. Vehicle cost for 100 example route miles per week at an example $1.00 per mile is $433.00 for the month.
$10,000 - $3,000 - $1,500 - $433.00 = $5,067.00
On those example inputs the margin is 50.67 percent, profit per stop is $101.34, and tech time is 23.09 hours per week. Every figure in this example is a made-up input chosen to show the math. Your result will use the numbers you enter.
Lifting the number
How to lift route profit
Once you can see the lines, the fixes get clearer. Work through them in this order, and re-run the calculator after each change.
- 01
Tighten the route before you add stops
Group stops that sit close together on the same day and cut backtracking. Every drive minute you remove is paid time returned to service work. Run the calculator with your current drive minutes, then with a tighter figure, and compare the labour line.
- 02
Time the stops honestly
Use the real minutes a stop takes, including testing, cleaning, and notes, not the minutes you wish it took. If service time is understated, the route looks profitable on paper and tight in real life. Honest times make the hours per week figure one you can staff to.
- 03
Watch chemical cost per stop
Chemical cost is charged per stop per month in this calculator, which makes drift easy to spot. If one route uses more chemicals per stop than another, check dosing and water balance before you accept the higher cost as fixed.
- 04
Check the price against the full cost
A stop price has to cover service time, drive time, chemicals, and its share of vehicle cost. If profit per stop stays thin after routing and chemical checks, the price itself is the lever to review. Test a new price in the calculator first.
Frequently asked questions
Straight answers to what buyers ask before they scope. Still stuck? .
- Start with monthly revenue: the number of stops on the route times your price per stop per month. Then take away labour for both service time and drive time, your chemical cost for the route, and your vehicle cost for the route miles. What is left is the monthly route profit. This calculator does that sum from your own figures.
- Drive time is paid time that brings in no revenue on its own. If stops are spread out, a tech can spend a large share of the day driving between pools instead of servicing them. The calculator adds drive minutes to service minutes before it works out labour hours, so you can see what a tighter route would save.
- Add the minutes at each stop to the drive minutes between stops. Multiply that total by the number of stops and by visits per stop per month, then divide by 60 to get monthly hours. Multiply those hours by your tech pay per hour. That is the labour cost the calculator shows, with the hours listed beside it.
- It includes labour, chemicals, and vehicle cost. Labour comes from service and drive time at your pay rate. Chemicals come from your chemical cost per stop per month times the number of stops. Vehicle cost comes from your route miles per week times your cost per mile, scaled to a month. Rent, insurance, and other overhead are not in this sum, so read the result as route profit before overhead.
- Profit per stop rises when the cost to serve each stop falls or the price per stop rises. The levers are tighter routing to cut drive minutes, steady service times, careful chemical use so you do not over-treat, and a price that covers the full time a stop takes. Change one figure at a time in the calculator and watch profit per stop move.
- The calculator works out monthly labour hours first, counting both service minutes and drive minutes for every visit. It then divides the monthly hours by 4.33 to give tech hours per week. Use that figure to check whether one tech can cover the route or whether the work needs to be split across more hands.
Stay on topic
More for pool service teams
The tools give you a range. A call gives you a number.
30-minute scoping call. We will walk through how your business handles routes, scheduling, and billing today, and you leave with a clear plan for the software that runs it.
