Deck cost calculator

Build a deck quote line by line: the decking in the material you choose, the railing, the stairs, and the extras. Every price is your own, so the total matches the quote in front of you.

  • Three material options
  • Railing and stairs
  • Cost per square foot

Before you run the numbers

One total, every line visible

A deck quote is not one price. It is a short list of separate charges: the decking, the railing, the stairs, and the extras your project needs. When those lines are bundled into a single figure, it is hard to tell what you are paying for.

This calculator keeps the lines separate. Enter the prices you have been quoted, or your own prices if you build decks, and see the total build up line by line, with the cost per square foot beside it.

Your numbers

1. Deck size

ft
ft

Area: 0 square feet, from length times width.

2. Choose a material and enter your price for it

3. Railing

ft

4. Stairs

5. Extras

Result

Estimated total

Enter your own prices on the left to see the total.

Short answer

A deck cost calculator adds up a deck quote from prices you enter: the deck size times your price per square foot for the material you choose, plus railing, stairs, and any extras you include such as a permit or lighting. It also shows the cost per square foot.

What the cost covers

What goes into the price of a deck?

The price of a deck covers the decking first. That is the deck area, which is the length times the width, times your price per square foot for the material you choose: pressure-treated, composite, or hardwood. The material you pick sets that price, so the same deck can carry a very different decking line from one material to the next.

The next two parts follow the shape of the deck. Railing is priced by the linear foot, for the runs you plan to enclose. Stairs are priced by the step, for the drop from the deck to the ground. Both depend on your deck plan, which is why the calculator asks for the railing length and the step count as their own inputs.

The last part is extras you choose to include: a permit, removal of an old deck, and lighting. Each one is priced on its own and only counts when you switch it on. That keeps a simple deck quote simple, and a larger project quote complete.

Cost partWhat it coversSet by
DeckingThe deck surface for the full area, at the material price you selectYour price per square foot for that material
RailingThe railing run around the deck edges you choose to encloseYour railing length and your price per linear foot
StairsThe steps from the deck down to the groundYour step count and your price per step
PermitThe approval fee for the project, when you include itYour permit price
Removal and lightingTaking away an old deck, and lights added to the new deck, when you include themYour price for each extra you include

The math

How the total is worked out

Start with the area: length times width. The decking line is that area times the price per square foot for the material you selected. Then add the railing, which is the railing length times your price per foot. Add the stairs, which is the step count times your price per step. Add each extra you included.

Total = Decking + Railing + Stairs + Included extras

Example, using example inputs only: a deck 16 feet long and 12 feet wide has an area of 192 square feet. At an example composite price of $25 per square foot, the decking is $4,800. Railing of 40 linear feet at an example price of $30 per foot is $1,200. Stairs of 5 steps at an example price of $150 per step are $750. A permit at an example price of $300 and lighting at an example price of $400 add $700.

$4,800 + $1,200 + $750 + $300 + $400 = $7,450

The cost per square foot on that example total is $7,450 divided by 192, which is about $38.80 per square foot. Every figure in this example is a made-up input chosen to show the math. Your total will use the prices you enter.

Getting it right

How to get an accurate deck quote

The total is only as good as the figures behind it. Four steps keep a quote accurate and free of surprises later.

  • 01

    Measure the deck you will really build

    The area drives the decking cost, and the area comes from the length times the width. Measure the planned deck, not the space you have. If the shape is not a simple rectangle, split it into rectangles, work out each one, and add the areas before you enter the size.

  • 02

    Price each material with your own figure

    Fill in your price per square foot for pressure-treated, composite, and hardwood, even if you plan to build with only one of them. With all three priced, you can switch the selected material and see at once how the total changes, without re-entering the rest of the quote.

  • 03

    Count railing and steps on the plan

    Railing cost depends on how many edges are enclosed and how long each run is. Steps depend on the height of the deck above the ground. Count both from the plan before you enter them, so the quote does not miss a run or a step that the build will need.

  • 04

    Ask for every line in writing

    A clear quote shows the decking, the railing, the stairs, and each extra as separate lines. If a quote gives you one lump sum, ask the builder to break it down. The itemised total from this calculator gives you a layout to compare against.

Frequently asked questions

Straight answers to what buyers ask before they scope. Still stuck? .

A deck quote usually lists the decking itself for the size and material you choose, the railing, the stairs, and any extras you include such as a permit, removal of an old deck, or lighting. Each part is priced on its own line, so ask for the quote in writing with every line shown. This calculator follows the same layout, and every price in it is one you enter yourself.
Take the full total for the deck and divide it by the deck area in square feet. The area is the length times the width. The calculator shows this figure only when the area is above zero. It is a useful way to compare two quotes for decks of a different size, as long as both quotes cover the same parts.
The material sets the price per square foot for the decking, and the decking is the largest part of most quotes. This calculator gives you a price field for each material: pressure-treated, composite, and hardwood. Enter your own price for each one, pick the material you are pricing, and the decking line uses that price across the full deck area.
Railing is priced by the linear foot. Enter the length of railing your deck needs and your price per foot, and the calculator multiplies the two. Stairs are priced by the step. Enter the number of steps and your price per step. Both appear as their own lines in the total, so you can see what each one adds.
Include the extras your project needs. A permit is a fee you enter for the approval your project requires. Removal covers taking away an old deck before the new one is built. Lighting covers the lights you plan to add to the deck. Each extra sits behind its own switch in the calculator, with a price field for your own figure.
Yes. A builder can enter its own price per square foot for each material, its railing price per foot, and its price per step, then add the extras for the job in question. The result is an itemised quote the client can read line by line, with the cost per square foot shown as well.

The tools give you a range. A call gives you a number.

30-minute scoping call. We will walk through how your team handles quotes, schedules, and crew planning today, and you leave with a clear plan for the software that runs it.