Christmas light installation cost calculator
Build a full-season quote line by line: the install, the add-ons, the takedown, and storage. Every price is your own, so the total matches the quote in front of you.
- Full season in one total
- Takedown and storage split
- Your own prices only
Before you run the numbers
One season, every line visible
A Christmas light quote is not one price. It is a short list of separate charges: putting the lights up, any extras such as tree wraps and wreaths, taking the lights down after the season, and storing them until the next year. When those lines are bundled into a single figure, it is hard to tell what you are paying for.
This calculator keeps the lines separate. Enter your own prices if you install lights, or the prices you have been quoted, and see the full-season total build up line by line.
Your numbers
1. The install
Leave the storey multiplier at zero if you charge one rate for every home. If you enter one, it is added once for each storey above the first.
2. Add-ons, at your prices
3. Takedown and storage
Takedown and storage are shown as separate lines in the result, so the customer sees what the end of the season costs before the install begins.
Result
Full-season total
Enter your own prices on the left to see the total.
Short answer
A Christmas light installation cost calculator prices the full season from your own rates. It multiplies roofline length by your price per foot, applies any storey multiplier you set, then adds tree wraps, wreaths, timers, takedown as a share of install, and your storage fee for one season total.
What the season cost covers
What goes into the price of a Christmas light installation?
The full-season price covers four kinds of cost. The first is the install itself: the roofline length in feet, times the price per foot. If the home has more than one storey and you charge more for the extra height, a storey multiplier adds your percentage for each storey above the first.
The second is add-ons: tree wraps, wreaths, and timers. Each one is priced on its own, per item, so the quote grows only by the extras the customer actually chooses.
The last two costs come after the holidays. Takedown is the work of removing the lights, charged here as a percentage of the install price. Storage is a flat fee for keeping the lights during the off-season. Both are easy to forget in a December quote, which is why this calculator asks for them from the start rather than leaving them to January.
| Cost part | What it covers | Who sets the price |
|---|---|---|
| Install | The roofline length times your price per foot, adjusted by your storey multiplier if you set one | The installer |
| Add-ons | Tree wraps per tree, wreaths per wreath, and timers per timer, each at your price | The installer |
| Takedown | Removing the lights after the season, charged as your percentage of the install price | The installer |
| Storage | A flat fee for keeping the lights stored during the off-season | The installer, if they offer storage |
The math
How the season total is worked out
Start with the install: roofline length times the price per foot. If a storey multiplier is entered, the install grows by that percentage for each storey above the first. Then add each add-on, add takedown as a percentage of the install, and add the flat storage fee.
Season total = Install + Add-ons + Takedown + Storage
Example: a roofline of 100 feet at an example price of $6 per foot gives an install of $600. The home has 2 storeys and the example storey multiplier is 10 percent, so the install becomes $660. Add-ons, using example prices: 2 tree wraps at $80 each come to $160, 1 wreath at $50, and 1 timer at $40, which is $250 in add-ons.
Takedown at an example 25 percent of the $660 install comes to $165. Storage is an example flat fee of $100.
$660 + $160 + $50 + $40 + $165 + $100 = $1,175
Every figure in this example is a made-up input chosen to show the math. Your total will use the prices you enter.
Getting it right
How to quote the full season well
The total is only as good as the figures behind it. Four habits keep a seasonal quote accurate and free of surprises later.
- 01
Quote the full season in one number
Give the customer one total that covers install, add-ons, takedown, and storage. When takedown is priced at the start, the January removal is already agreed and paid for in the plan, so it is never a surprise bill after the holidays.
- 02
Measure the roofline before you price
The install price starts with roofline length, so a guessed length gives a guessed quote. Measure the roofline you will actually light, in feet, and use that figure. If the home has more than one storey, note the storey count at the same visit.
- 03
Count the add-ons on site
Tree wraps, wreaths, and timers are easy to miss in a phone quote. Walk the property, count each one with the customer, and price each at your own rate. The counts go into the quote as their own lines, so there is no dispute later about what was included.
- 04
Agree takedown and storage up front
Decide before the install who removes the lights, when they come down, and where they are stored. Put your takedown percentage and your storage fee into the quote from the start, so the end of the season runs to the same agreement as the beginning.
Frequently asked questions
Straight answers to what buyers ask before they scope. Still stuck? .
- A full-season quote covers the install itself, any add-ons you choose, the takedown after the season, and storage if you use it. Each part is priced separately, so ask for the quote in writing with every line shown. This calculator follows the same layout, and every price in it is one you enter yourself.
- Taller homes take more ladder work and more care at height, so many installers add a percentage for each extra storey. If you use one, enter your percentage in the calculator. It adds that share once for each storey above the first, so a two-storey home with a 10 percent multiplier adds 10 percent to the install price. Leave it at zero if you charge one rate for every home.
- The calculator prices three common add-ons: tree wraps, charged per tree, wreaths, charged per wreath, and timers, charged per timer. Enter your own price for each one and the count for this job. Leave the count at zero for any add-on the job does not include.
- Takedown is the work of removing the lights after the season ends. In this calculator it is charged as a percentage of the install price, using the percentage you enter. Enter your own percentage, and the calculator shows the takedown amount as its own line in the season total.
- The storage fee is a flat amount for keeping the lights stored during the off-season, ready for the next install. Enter the flat fee you charge, or the fee you were quoted, and it is added to the season total as its own line. Leave it at zero if storage is not part of the job.
- Yes. An installer can enter their own price per foot, their storey multiplier if they use one, and their prices for tree wraps, wreaths, and timers. Add the takedown percentage and the storage fee, and the result is an itemised full-season quote the customer can read line by line.
Stay on topic
More for Christmas light teams
The tools give you a range. A call gives you a number.
30-minute scoping call. We will walk through how your team handles quotes, install schedules, takedown, and storage today, and you leave with a clear plan for the software that runs it.
