Chimney sweep quote calculator
Build a sweep quote line by line: each flue at your own price, the add-ons the job needs, and travel. Every figure is your own, so the quote matches how you charge.
- Three flue types priced separately
- Add-ons only when needed
- Travel shown as its own line
Before you run the numbers
One quote, every line visible
A sweep quote is not one price. It is a short list of separate charges: each flue swept, any add-ons you include, and the travel to the property. When those lines are bundled into a single figure, it is hard to tell what you are paying for.
This calculator keeps the lines separate. Enter your own price for each flue type, add the extras the job needs, and see the quote build up line by line.
Your numbers
1. Flues: count each type and enter your price
2. Add-ons
3. Travel
4. Discount (optional)
The discount comes off the services subtotal only. Travel stays at full price.
Result
Quote total
Enter your own prices on the left to see the total.
Short answer
A chimney sweep quote calculator adds up a sweep quote from your own prices: each open fire, stove, and boiler flue at your price per flue, any add-ons you include, and travel. A discount on the services subtotal is then taken off. Every figure is one you enter.
What the quote covers
What goes into the price of a sweep job?
The price of a sweep job covers three kinds of cost. The first is the sweeping itself. Each flue is priced by type: an open fire flue, a stove flue, or a boiler flue. You enter the count for each type and your own price per flue for that type.
The second is add-ons. Some jobs need extra work, such as removing a nest, a camera inspection of the flue, or fitting a cap or cowl. Each add-on sits behind its own switch, with your own price, so it only counts when the job needs it.
The third is travel. You enter the distance in miles and your own charge per mile. A discount, if you offer one, comes off the services subtotal. Travel is added after the discount, and the discount does not reduce the travel line.
| Cost part | What it covers | How the price is set |
|---|---|---|
| Flue sweeping | Each open fire, stove, and boiler flue, at your price per flue for that type | You, from your own price per flue |
| Add-ons | Extra work you include, such as nest removal, a camera inspection, or a cap or cowl fitting | You, from your own price per add-on |
| Travel | The trip to the property, charged by the mile | You, from your own charge per mile |
| Discount | A percentage you take off the services subtotal | You, from your own percentage |
The math
How the quote is worked out
The quote is worked out in a set order. First, add up the services: each flue count times its price, plus each add-on you included. That gives the services subtotal.
Next, work out the discount. The discount is your discount percentage times the services subtotal. Then add the travel, which is the miles times your charge per mile, and take the discount off.
Quote = Services subtotal + Travel - Discount
Example: 2 open fire flues at an example price of $70 each come to $140. One stove flue at an example price of $80 and one boiler flue at an example price of $90 bring the flue total to $310. A camera inspection at an example price of $60 is included, so the services subtotal is $370.
Travel of 20 miles at an example charge of $2 per mile comes to $40. An example discount of 10% on the services subtotal is $37. The quote is $373. With 4 flues in total, the services subtotal works out at $92.50 per flue.
$370 + $40 - $37 = $373
Every figure in this example is a made-up input chosen to show the math. Your quote will use the prices you enter.
Getting it right
How to get an accurate sweep quote
The quote is only as good as the figures behind it. Four steps keep a quote accurate and free of surprises later.
- 01
Count every flue before you price
Walk the property and count each flue by type: open fire, stove, and boiler. The count and the type decide the services subtotal, so a missed flue means a quote that is short before the work starts.
- 02
Confirm the add-ons the job needs
A nest, a camera inspection, or a cap or cowl fitting each adds work. Check which extras this job needs, switch those on, and leave the rest off, so the client only pays for work that will happen.
- 03
Measure the trip, do not guess it
Enter the real distance in miles and your charge per mile. Travel is a separate line in the quote, so the client can see what the trip costs apart from the sweeping.
- 04
Put the discount in writing
If you offer a discount, state the percentage and show it as its own line. The discount comes off the services subtotal only. Travel stays at full price, and the quote shows both lines clearly.
Frequently asked questions
Straight answers to what buyers ask before they scope. Still stuck? .
- It includes each flue you sweep, priced by type, any add-ons you switch on, and travel to the property. You can also take a discount off the services subtotal. Every price is one you enter, so the quote reflects your own figures.
- Enter the count for each type and your own price per flue for that type. Open fire flues, stove flues, and boiler flues each have their own count and price fields. The calculator multiplies each count by its price and adds the three lines together.
- You can include nest removal, a camera inspection of the flue, and fitting a cap or cowl. Each add-on has its own switch and price field. Switch on only the work this job needs, and enter your own price for each one.
- Travel is the distance in miles times your own charge per mile. Enter the miles for the trip and the amount you charge for each mile. Travel is shown as its own line and is added to the quote after the discount is worked out.
- The discount is your percentage times the services subtotal. The services subtotal is the flues plus any add-ons you included. The discount does not reduce the travel line. The quote is the services subtotal plus travel, minus the discount amount.
- It is the services subtotal divided by the total number of flues. It gives one simple figure you can use to compare quotes across jobs with different mixes of flues. It appears once at least one flue is counted. If no flues are counted, no average is shown.
Stay on topic
More for chimney sweep teams
The tools give you a range. A call gives you a number.
30-minute scoping call. We will walk through how your team books sweeps, builds quotes, and plans routes today, and you leave with a clear plan for the software that runs it.
