Carpet cleaning price calculator
Build a carpet cleaning quote line by line: rooms or floor area, stairs, and add-ons, with your minimum job fee applied. Every price is your own, so the total matches the quote in front of you.
- Rooms or area pricing
- Stairs per step
- Minimum fee applied
Before you run the numbers
One total, every line visible
A carpet cleaning quote is not one price. It is the charge for the rooms or the floor area, plus the stairs, plus any extra treatments the job needs. When those lines are bundled into a single figure, it is hard to tell what you are paying for.
This calculator keeps the lines separate. Enter the prices you have been quoted, or your own prices if you run a cleaning company, and see the total build up line by line.
Your numbers
1. Rooms or floor area
2. Stairs
3. Add-ons
4. Minimum job fee
If the lines above add up to less than this fee, the fee becomes the price. Leave at zero if you do not use one.
Result
Estimated total
Enter your own prices on the left to see the total.
Short answer
A carpet cleaning price calculator builds a quote from your own prices: rooms times your price per room, or floor area times your price per square foot, plus stairs at your price per step and any add-ons you include. If the total is below your minimum job fee, that fee sets the price.
What the cost covers
What goes into the price of carpet cleaning?
The price of a carpet clean covers three kinds of charge, plus a floor under the whole job. The first is the main clean itself. Companies price it one of two ways: by the room, or by the square foot of carpet. This calculator lets you pick the way your quote uses, and enter your own price for it either way.
The second is stairs. Steps are cleaned one at a time, so they are charged per step rather than as part of a room. The third is add-ons: extra treatments such as pet treatment, stain protection, or deodoriser. Each add-on is optional, and each one carries its own price.
The floor under the job is the minimum job fee. If the rooms, stairs, and add-ons add up to less than that fee, the fee is the price. The calculator applies the fee for you and tells you when it has set the price, so the rule is never hidden inside the total.
| Cost part | What it covers | Who sets the price |
|---|---|---|
| Rooms or floor area | The main clean, priced per room or per square foot, one way or the other | The cleaning company |
| Stairs | Each step cleaned, charged at a price per step | The cleaning company |
| Add-ons | Extra treatments you choose, such as pet treatment, stain protection, or deodoriser | The cleaning company |
| Minimum job fee | The lowest price for a job; it applies only when the other lines add up to less | The cleaning company |
The math
How the total is worked out
Add the room or area charge, the stairs charge, and each add-on you include. That sum is the subtotal. The total is the larger of the subtotal and your minimum job fee.
Total = max(Subtotal, Minimum job fee), where Subtotal = Rooms or Area + Stairs + Add-ons
Example, in rooms mode: 4 rooms at an example price of $40 per room comes to $160. Stairs of 10 steps at an example price of $3 per step comes to $30. Pet treatment at an example price of $30 and stain protection at an example price of $50, with deodoriser not included.
$160 + $30 + $30 + $50 = $270
With an example minimum job fee of $100, the subtotal of $270 is higher, so the total stays $270. The per-room view is $270 divided by 4 rooms, which is $67.50 per room. If a subtotal came to $80 against that same example minimum fee of $100, the total would be $100 instead. Every figure in this example is a made-up input chosen to show the math. Your total will use the prices you enter.
Getting it right
How to get an accurate carpet cleaning quote
The total is only as good as the figures behind it. Four steps keep a quote accurate and free of surprises later.
- 01
Count the rooms and the steps before you quote
Ask how many rooms are carpeted and how many steps the stairs have, and check whether the rooms are alike in size. The counts drive the quote in both pricing modes, so a wrong count means a wrong price.
- 02
Pick one pricing mode and stay with it
Quote either by the room or by the square foot, not a mix of both on the same job. Switching modes halfway through a quote makes the lines hard for the customer to follow and hard for you to check later.
- 03
Name the add-ons the job actually needs
Pet treatment, stain protection, and deodoriser are separate treatments with separate prices. Ask about pets and stains before you quote, turn on only the add-ons the job needs, and show each one as its own line.
- 04
State the minimum fee up front
If your company has a minimum job fee, say so before the quote is agreed. A small job that lands on the minimum fee is fair when the customer heard about the fee first, and a surprise when they did not.
Frequently asked questions
Straight answers to what buyers ask before they scope. Still stuck? .
- A carpet cleaning quote lists the charge for the rooms or the floor area, the charge for any stairs, and the price of any add-ons you choose, such as pet treatment or stain protection. Each part is priced separately. This calculator follows the same layout, and every price in it is one you enter yourself.
- Both ways are in use, and the right one is the way your company already prices its work. Pricing by the room is quick when rooms are alike in size. Pricing by the square foot fits jobs where room sizes vary a lot. The calculator has a toggle for both, so you can enter your own price either way and compare the result.
- Stairs are charged per step, because each step is cleaned one at a time and takes its own work. Count the steps, then enter your price per step. The calculator multiplies the two and shows the stairs as their own line, so the customer can see why stairs add to the price.
- Add-ons are extra treatments you choose on top of the clean itself. This calculator covers pet treatment, stain protection, and deodoriser, each at your own price and each behind its own include toggle. Turn on only the ones the job needs, and each one you include appears as its own line in the quote.
- A minimum job fee is the lowest amount a company will charge for a job, however small it is. It covers the cost of getting to the job and setting up. Enter your minimum fee in the calculator. If the lines add up to less than that fee, the fee becomes the price, and the result says so.
- Yes. A company can enter its own price per room or per square foot, its price per step for stairs, its add-on prices, and its minimum job fee. The result is an itemised quote the customer can read line by line, which makes the price easier to explain on the phone and in writing.
Stay on topic
More for carpet cleaning teams
The tools give you a range. A call gives you a number.
30-minute scoping call. We will walk through how your company handles quotes, bookings, and routes today, and you leave with a clear plan for the software that runs it.
