Butcher yield calculator

Turn a carcass weight into cut weights and values: your own cut rows, your own percentages, and your own prices per pound. The rows start empty, because your cut sheet is the input.

  • Your own cut sheet
  • No preset percentages
  • Processing fee shown

Before you run the numbers

Your cut sheet, added up for you

A carcass becomes money one cut at a time. Each cut has a weight, and each weight has a value at your price per pound. Adding that up by hand for every carcass is slow, and it is easy to lose track of what share of the carcass the rows cover.

This calculator does the arithmetic on your own figures. Enter the hanging weight, add your cut rows with your percentages and your prices, and see the weights, the values, and the total build up row by row.

Your numbers

1. Carcass weight

lb

2. Your cut rows

%
%
%

Rows start empty on purpose. Enter the shares and prices from your own cut sheet.

3. Processing fee

Result

Estimated total

Enter your own prices on the left to see the total.

Short answer

A butcher yield calculator turns a carcass weight into cut weights and values. You enter the hanging weight, then your own cut rows: a cut name, its share of the carcass, and your price per pound. It adds up the weights, the retail value, and the value left after the processing fee.

What the value covers

What goes into the value of a carcass?

The value of a carcass is the sum of its cuts. Each cut takes a share of the carcass weight. That share, applied to the hanging weight, gives the cut weight. The cut weight, at your price per pound for that cut, gives the cut value.

Add the cut values together and you get the total retail value of the carcass. Divide that total by the carcass weight and you get the value per pound of carcass, a single figure that shows what each pound of the whole carcass is worth at your prices.

The processing fee sits apart from the cut values. It is either one flat fee or a fee per pound of carcass, at the amount you enter. The calculator shows it on its own line, then shows the value after the processing fee. No percentage, price, or fee in this calculator comes from the tool. Each one is a figure you enter from your own cut sheet and your own pricing.

Value partWhat it coversWho sets the figure
Cut weightsEach cut weight, from the carcass weight times the share you enter for that cutYour own cut sheet
Cut valuesEach cut value, from the cut weight times your price per pound for that cutYour own prices
Total retail valueAll the cut values added togetherWorked out by the calculator
Processing feeOne flat fee, or a fee per pound of carcass, at the amount you enterYou or your processor
Value after the feeThe total retail value minus the processing feeWorked out by the calculator

The math

How the values are worked out

Each cut weight is the carcass weight times the cut share you enter, divided by 100. Each cut value is that weight times your price per pound. The totals are the cut weights and cut values added together.

Cut weight = Carcass weight x Cut share / 100; Cut value = Cut weight x Your price per pound

Example: a carcass at an example hanging weight of 600 lb, with three example rows. Ribeye at an example share of 12 percent and an example price of $14 per pound gives 72 lb and $1,008. Ground at an example share of 30 percent and an example price of $6 per pound gives 180 lb and $1,080. Stew meat at an example share of 10 percent and an example price of $7 per pound gives 60 lb and $420.

72 lb + 180 lb + 60 lb = 312 lb; $1,008 + $1,080 + $420 = $2,508

The value per pound of carcass on those example figures is $2,508 divided by 600 lb, which is $4.18. The assigned share is 12 plus 30 plus 10, which is 52 percent. A processing fee at an example rate of $0.10 per pound comes to $60, so the value after the processing fee is $2,508 minus $60, which is $2,448. Every figure in this example is a made-up input chosen to show the math. Your result will use the figures you enter.

Getting it right

How to get an accurate carcass value

The total is only as good as the figures behind it. Four steps keep a carcass value accurate and honest.

  • 01

    Start from the real hanging weight

    Every cut weight comes from the carcass weight, so a wrong starting weight makes every row wrong. Use the hanging weight from the scale ticket for that carcass, not a live weight or an estimate from an earlier animal.

  • 02

    Copy the percentages from your own cut sheet

    The rows should match the way your shop actually cuts. Enter the share each cut takes on your own sheet, cut by cut. If a cut is not on your sheet, leave it out and let the unassigned share show what is still unaccounted for.

  • 03

    Price each cut at your own price per pound

    Each row carries its own price, so a high-value cut and a low-value cut are valued honestly. Use the prices on your current price list. A single blended price across all cuts would hide which cuts carry the value of the carcass.

  • 04

    Check the assigned share before you use the total

    Look at the share line in the result. If the rows add up to more than 100 percent, fix the rows first. If they add up to less, decide whether the unassigned share is trim and bone you accept, or cuts you still need to add as rows.

Frequently asked questions

Straight answers to what buyers ask before they scope. Still stuck? .

The hanging weight is the weight of the carcass after the animal has been processed to carcass stage and before it is broken down into cuts. It is the starting weight for the whole calculation. Every cut weight in this calculator is a share of that hanging weight, using the percentages you enter yourself.
Take the carcass weight and multiply it by the cut share you enter, then divide by 100. For example, a cut at 12 percent of a 600 pound carcass weighs 72 pounds. The calculator does this for every row you add, using only the percentages from your own cut sheet.
It is the total retail value of all your cuts divided by the carcass weight. It tells you what each pound of the whole carcass is worth once it is cut and priced at your own prices per pound. It is a useful single figure for comparing one carcass with another when both are priced from your own figures.
The rows would claim more weight than the carcass has, so at least one percentage needs checking. The calculator still shows the totals, and it adds a plain warning line in the result so you can spot the problem. Check the rows against your cut sheet and correct the share that is too high.
The rest of the carcass is simply not assigned to a cut row yet. That can be trim, bone, or cuts you have not listed. The result notes the assigned share and the unassigned share, using only your own figures. Add a row for the remaining cuts if you want them counted in the value.
The processing fee is shown on its own line, either as one flat fee or as a fee per pound of carcass. The calculator then shows the value after the processing fee, which is the total retail value minus the fee. Keeping the fee separate makes it clear what the cuts are worth and what the processing takes out.
No. The calculator ships with no preset percentages, and the rows start empty. Every percentage, price, and fee is one you enter from your own cut sheet and your own pricing. The tool does the arithmetic on your figures. It does not suggest a yield for any animal or any cut.

The tools give you a range. A call gives you a number.

30-minute scoping call. We will walk through how your shop handles cut sheets, orders, and counter sales today, and you leave with a clear plan for the software that runs it.