Air duct cleaning cost calculator
Build an air duct cleaning quote line by line: the vents, the systems, the dryer vents, the sanitising, and the travel fee. Every price is your own, so the total matches the quote in front of you.
- Itemised quote lines
- Sanitising both ways
- Per vent view included
Before you run the numbers
One total, every line visible
An air duct cleaning quote is not one price. It is a short list of separate charges: the vents, a charge for each system, any dryer vents, any sanitising, and the travel to the job. When those lines are bundled into a single figure, it is hard to tell what you are paying for.
This calculator keeps the lines separate. Enter the prices you have been quoted, or your own prices if you run a duct cleaning company, and see the total build up line by line, with a per vent view of the total as well.
Your numbers
1. Vents
2. Systems
Each system has its own duct run and its own setup, so it is charged as its own line.
3. Dryer vent add-on
4. Sanitising
5. Travel
Result
Estimated total
Enter your own prices on the left to see the total.
Short answer
An air duct cleaning cost calculator adds up a quote from your own prices: vents times your price per vent, a charge for each system, any dryer vents, sanitising in the way you charge for it, and a travel fee. Every price is one you enter, so the total reflects your own figures.
What the cost covers
What goes into the price of air duct cleaning?
The price of air duct cleaning covers five kinds of cost. The first is the vents: every supply and return grille in the home or building, charged at a price per vent. The second is a charge for each system or furnace, because each system has its own duct run and its own setup work.
The third is the dryer vent, the separate duct from the dryer to the outside, priced on its own when it is included. The fourth is sanitising, a treatment applied inside the ducts after the cleaning, charged either per vent or as one flat amount.
The last cost is travel: getting the crew and the equipment to the job. Each of these lines is priced by the company doing the work, which is why this calculator asks you to enter every price rather than guessing any of them for you.
| Cost part | What it covers | Who sets the price |
|---|---|---|
| Vents | Each vent or register, times your price per vent | You, as your own price per vent |
| Systems | Each system or furnace served, times your per system charge | You, as your own per system charge |
| Dryer vents | Each dryer vent cleaned, times your price for each one | You, as your own dryer vent price |
| Sanitising | A treatment inside the ducts after cleaning, charged per vent or as one flat amount | You, in the way you charge for it |
| Travel | Getting the crew and equipment to the job | You, as your own travel fee |
The math
How the total is worked out
The total is a simple sum. Start with the vent count times your price per vent, and add the number of systems times your per system charge. Then add the dryer vents at your price for each one, add the sanitising in the way you charge for it, and add the travel fee.
Total = Vents + Systems + Dryer vents + Sanitising + Travel
Example inputs: 14 vents at an example price of $35 per vent comes to $490. One system at an example charge of $99. One dryer vent at an example price of $59. Sanitising as an example flat amount of $79, and a travel fee of $0.
$490 + $99 + $59 + $79 + $0 = $727
The per vent view on that example total is $727 divided by 14 vents, which is $51.93 per vent. Every figure in this example is a made-up input chosen to show the math. Your total will use the prices you enter.
Getting it right
How to get an accurate air duct cleaning quote
The total is only as good as the figures behind it. Four steps keep a quote accurate and free of surprises later.
- 01
Count the vents in person
Walk the home or building and count every supply and return grille. A count taken from a floor plan alone often misses a return or a vent that was added later, and a wrong count moves every per vent line on the quote.
- 02
Confirm how many systems there are
Ask how many furnaces or air handlers serve the building and check each one. A second system adds its own duct run and its own setup, so it belongs on the quote as its own charge from the start.
- 03
Ask for every line in writing
A clear quote shows the vents, the systems, the dryer vents, the sanitising, and the travel fee as separate lines. If a quote gives you one lump sum, ask for the breakdown. The itemised total from this calculator gives you a layout to compare against.
- 04
Check the per vent view
Divide the total by the vent count and look at the figure per vent. It is a quick way to compare two quotes for the same home side by side, even when the two companies split their charges into different lines.
Frequently asked questions
Straight answers to what buyers ask before they scope. Still stuck? .
- A quote is worked out line by line. Count the vents and multiply by the price per vent, add a charge for each system or furnace, add any dryer vents at their own price, add sanitising in the way it is charged, and add any travel fee. This calculator follows the same layout, and every price in it is one you enter yourself.
- A vent or register is each grille where air leaves or returns through the duct run: the supply grilles in rooms and the return grilles that pull air back. Walk the home or building and count every grille you can see. That count is the vent count you enter, and it is the figure the per vent price is multiplied by.
- Each system or furnace has its own duct run, its own blower, and its own access points, so each one adds setup and cleaning work of its own. A home with two systems takes more work than the same home on one system, even at the same vent count. Charging per system keeps that extra work visible as its own line.
- The dryer vent add-on covers cleaning the separate duct that carries hot air and lint from the dryer to the outside. It is not part of the main duct run, so it is priced on its own. Enter how many dryer vents there are and your price for each one, and the calculator adds that line to the quote.
- Sanitising is a treatment applied inside the ducts after the cleaning, priced as an extra line on the quote. Some companies charge for it per vent, so the cost rises with the vent count. Others charge one flat amount for the whole job. The calculator supports both: pick per vent and enter your per vent price, or pick flat and enter that amount.
- Yes. A company can enter its own price per vent, its per system charge, its dryer vent price, the way it charges for sanitising, and its travel fee. The result is an itemised quote the customer can read line by line, with a per vent view of the total as well. That makes the conversation about price much easier.
Stay on topic
More for cleaning teams
The tools give you a range. A call gives you a number.
30-minute scoping call. We will walk through how your team handles quotes, job scheduling, and service records today, and you leave with a clear plan for the software that runs it.
