Notary fee calculator
Build a mobile notary quote line by line: the acts at the cap your state sets, plus your own travel, package, and after-hours charges. Every figure is one you enter.
- Your own state cap
- Act fees kept separate
- Travel and package included
Before you run the numbers
One quote, every line visible
A notary quote has two kinds of charge in it. The first is the fee for each act, such as an acknowledgment or a jurat, and that fee is capped. The second is what you charge for the visit itself: travel, a loan signing package, and work after hours. Mixing the two together makes a quote hard to explain.
Fee caps vary by state, and this calculator does not hold a fee table for any state. Enter the cap your own state sets, count the acts, and add your own service charges. The result shows the capped part and your part as separate lines.
Your numbers
1. Count the acts
2. Your fee cap
Fee caps vary by state. This tool does not hold a fee table. Enter the cap from your own state rules.
3. Travel
4. Loan signing package
Optional. Leave at zero when the job is not a loan signing package.
5. After-hours work
The surcharge is worked out on the subtotal: act fees plus travel plus package fee.
Result
Estimated total
Enter your own numbers on the left to see the quote.
Short answer
A notary fee calculator adds up a signing quote in two parts: the act fees, worked out from the number of acts times the fee cap you enter from your own state rules, and your own service charges for travel, a loan signing package, and any after-hours work.
What the quote covers
What does a mobile notary quote cover?
The capped part of the quote is the acts. An acknowledgment confirms that a signer appeared and confirmed who they are. A jurat adds an oath that the contents of the document are true. An oath or affirmation can stand on its own, and a copy certification covers a copy you check against the original document. Each act is charged at the cap you enter.
The rest of the quote is your own service charges. Travel covers the trip to the signer, charged by the mile at your rate. A loan signing package fee is your flat charge for handling a full set of loan documents. An after-hours surcharge is your percentage for a signing outside your working hours. In this calculator those charges sit on their own lines, separate from the capped act fees.
| Charge part | What it covers | Who sets the amount |
|---|---|---|
| Act fees | Acknowledgments, jurats, oaths or affirmations, and copy certifications, charged at the cap you enter | Capped by your state rules |
| Travel | The trip to the signer, charged as miles times your per-mile rate | You |
| Loan signing package | Your flat fee for handling a full loan signing package, when the job is a package | You |
| After-hours surcharge | Your percentage added to the subtotal when a signing falls outside your working hours | You |
The math
How the total is worked out
First, add up the acts and multiply by the cap you entered. If your cap applies per signature and you turned that option on, multiply by the number of signers as well. That gives the act fees. Next, add the travel and the package fee to make a subtotal. Last, work out the after-hours percentage of that subtotal and add it on. The surcharge applies to the whole subtotal, in that order.
Act fees = Total acts x Cap, times signers only when the cap applies per signature
Total = Subtotal + (Subtotal x After-hours %), where Subtotal = Act fees + Travel + Package fee
Example: 2 acknowledgments, 1 jurat, and 1 oath make 4 acts in total. With an example cap of $10 entered for one act, the act fees come to $40. Travel of 20 miles at an example rate of $1 per mile comes to $20. An example loan signing package fee of $75 brings the subtotal to $135. An example after-hours surcharge of 10% on that subtotal is $13.50, so the total is $148.50. Of that total, $40 is capped act fees and $108.50 is service charges.
(2 + 1 + 1 + 0) x $10 = $40, and $40 + $20 + $75 = $135, and $135 + ($135 x 10%) = $148.50
Every figure in this example is a made-up input chosen to show the math. Your quote will use the cap and charges you enter.
Getting it right
How to quote a signing accurately
The total is only as good as the figures behind it. Four steps keep a quote accurate and clear for the client.
- 01
Count the acts before you travel
Go through the documents before you set off and count each act: acknowledgments, jurats, oaths, and copy certifications. The count drives the capped part of the quote, so a missed act means a quote you have to change at the table.
- 02
Enter the cap your state sets
Fee caps vary by state, and this tool holds no fee table. Look up the cap in your own state rules and enter that figure. Check whether your cap applies per act or per signature, and set the per signature option to match.
- 03
Price the visit as its own lines
Travel, a loan signing package fee, and after-hours work are your own service charges. Give each one its own line with your own figure, rather than folding them into the act fees, so the capped part and your part stay separate.
- 04
Send the quote in writing
Send the client the itemised quote before the visit: each act, the act fee subtotal, travel, package, and any surcharge, with the total at the end. A written quote stops fee questions at the table and gives you a record if the job changes.
Frequently asked questions
Straight answers to what buyers ask before they scope. Still stuck? .
- Your state sets the cap on what you can charge for one notarial act, and the cap is not the same in every state. This calculator does not hold a fee table and does not fill in a cap for you. Look up the cap in your own state rules, enter that figure in the cap field, and the tool works out the act fees from it.
- Act fees are the charges for the acts themselves, such as an acknowledgment or a jurat, and they are limited by the cap your state sets. Service charges are the amounts you set yourself for the visit around the acts: travel, a loan signing package, and after-hours work. The result keeps the two parts separate so a client can see which part is capped and which part is yours.
- Some caps are charged for each signature on a document, and some are charged for each act. If your state cap applies per signature, turn on the per signature option and enter the number of signers. The calculator then multiplies the act fees by the signer count. If your cap applies per act, leave the option off and the signer count is not used.
- Travel is a service charge you set yourself, separate from the capped act fees. Enter the miles for the trip and your own charge per mile, and the calculator multiplies the two to give the travel line. Agree the travel charge with the client before the visit, so it is part of the quote from the start and not a surprise at the door.
- Enter your own after-hours percentage. The calculator first adds the act fees, the travel, and the package fee into a subtotal. It then works out your percentage of that subtotal and adds it on top to reach the total. The surcharge is never worked out on the act fees alone.
- Yes. Count the acts in the package, enter the cap your state sets, and add your loan signing package fee as its own line. Add the travel for the trip and any after-hours percentage that applies. The result shows the capped act fees and your service charges as separate parts of one quote, which is the layout to send to the client or the signing service.
Stay on topic
More for notary teams
The tools give you a range. A call gives you a number.
30-minute scoping call. We will walk through how your notary business handles bookings, quotes, and signer records today, and you leave with a clear plan for the software that runs it.
